HOME |
PRODUCTS |
TECH SUPPORT |
ABOUT US |
CONTACT US |
View Cart
Checkout
SEARCH
Advanced Search
PRODUCT
CATEGORIES Load Cells / Force Sensors Beam Load Cells Torque Sensors Load Cell Displays
Signal Conditioning Data Acquisition
Software Load Cell Accessories
TECH
SUPPORT
Online Manuals
Wiring / Color Code
Calibration Certificates
Load Cell Troubleshooting
Warranty / Repair
Load Cell Terminology
Calculators
Free Load Cell Catalog
Track Your Order
Learn about Plug and Play Smart Sensors
We gladly accept:
View Cart
Checkout
LOW PROFILE COMPRESSION ONLY
LOAD COLUMN LOAD CELL
Our CLC Series is our high capacity compression only
load cell, featuring
low profile compact size for a wide
range of portable and dedicated applications.
The loading
diameter (D1) is slightly convex for accurate load distribution.
Low deflection through design results in ultra fast frequency
response.
All ranges are made from 17-4ph heat treated
stainless steel and incorporate
a stainless steel molded
connector system designed to resist washdown
and splash.
The mating connector, sold seperately, is available in three
different cable lengths.
SPECIFICATIONS
Rated
Output (R.O.):
2 mV/V nominal
Nonlinearity:
0.25% of R.O.
Hysteresis:
0.25% of R.O
Nonrepeatability:
0.1% of R.O.
Zero Balance:
1.0% of R.O.
Compensated
Temp. Range:
60° to 160°F
Safe Temp. Range:
-65° to 200°F
Temp.
Effect on Output:
0.005% of Load/°F
Temp. Effect
on Zero:
0.01% of R.O./°F
Terminal
Resistance:
350 ohms nominal
Excitation Voltage:
10 VDC
Safe Overload:
150% of R.O.
Deflection:
0.001 @ R.O.
DIMENSIONS (INCHES)
MODEL
CAPACITY
LBS.
D
D1
H
H1
H2
BUTTON
RADIUS
A
B
C
NATURAL
RINGING
FREQUENCY
HZ
WT.
LBS.
CLC-50K
50,000
2.750
2.060
2.250
.250
1.000
20.0
1/4-28
.250
1.500
32,000
5
CLC-100K
100,000
2.750
2.060
2.250
.250
1.000
20.0
1/4-28
.250
1.500
32,000
6
CLC-200K
200,000
3.500
2.810
4.000
.250
1.875
24.0
3/8-24
.375
2.000
32,000
8
CLC-300K
300,000
4.250
3.560
4.500
.250
2.125
24.0
3/8-24
.375
2.500
32,000
9
CLC-400K
400,000
4.500
3.810
5.000
.250
2.375
24.0
3/8-24
.375
2.500
32,000
10
Order Code Model
Capacity Range
Description
Price
Quantity
Add to Cart
[Close Box]
ACCESSORIES
CAL-TEDS
Plug & Play Option
AD9
(9 PIN "D" Series) Connector attached to the
end of a Load Cell or Torque sensor cable with a TEDS
( Transducer Electoric Data Sheet ) EPPROM. Used with
a DPM-3 Load Cell Meter, the Load Cell and DPM-3 will
self calibrate. This option is a real time saver.
Learn about Plug & Play Smart Sensors.
[Close Box]
Learn
about Plug and Play Smart Sensors
What are Plug and Play Smart Sensors?
A Plug and Play Smart Sensor is a Sensor that is compliant to the IEEE
1451.4 Standard. TEDS, or Transducer Electronic Data Sheet, is a set of electronic data
in a standardized format defined within the IEEE 1451.4 standard. This data specifies what
type of sensor is present, describes its interface, and gives technical information such
as sensitivity, bridge type, excitation, etc. This information is stored in an EEPROM chip attached
to a sensor. By having this chip, the sensor can identify and describe itself to the
network and or Smart Load Cell Meter, thereby easing automatic system configuration. Let's
say you have a Transducer Techniques Load Cell or Torque Sensor with the
the proper instrument IEEE 1451.4 enabled Load Cell or Torque Sensor could be swapped in, self-identify,
and
work appropriately.
What are the advantages of Plug and Play Smart
Sensors?
Benefits that can be experienced now include:
Simplified troubleshooting
Reduced safety risks. It is no longer necessary to
"climb on machines" for connection verification
Reduced costs for set-up and tear-down
No recalibration is needed when replacing sensors
The data acquisition system can recalibrate itself
Advantages that will be available in the future include:
Integration with wireless transceivers
Elimination of large lengths of analog wiring
Reduced installation, maintenance and upgrade
costs of measurement and control systems
The opportunity to add intelligence to sensors
Can a legacy / non-TEDS sensor
be converted to a TEDS "Plug and Play" sensor?
Yes. A legacy / non-TEDS sensor can be converted to a TEDS "Plug
and Play" sensor. Transducer Techniques offers a CAL-TEDS service to convert your sensor to a TEDS "Plug and
Play" compliant sensor. The service consists of a connector, recalibration and a programmed
EEPROM. This will update a legacy / non-TEDS sensor to be capable of plugging into Transducer
Techniques IEEE 1451.4 compliant DPM-3 Smart Load Cell Meter.
What is Virtual TEDS?
Virtual TEDS is an online library of data sheets developed by National
Instruments (www.ni.com) that contain the same information that would be found in an EEPROM TEDS,
but exist for sensors not containing the EEPROM. This would define Plug and Play capability
for legacy / non-TEDS sensors. As a National Instruments Plug and Play Sensor Partner and a
National Instruments Alliance Member, Transducer Techniques has contributed the data for all
its sensors to the Virtual TEDS database.
What
parameters are included on a Transducer Techniques
TEDS chip?
TEDS Item
Values
Manufacturer ID
Transducer Techniques (ID#42)
Model Number
28
Version Letter
A
Version Number
3
Serial Number
149087
Transducer Electrical Signal Type
Bridge Sensor
Minimum Physical Value
0 lb
Maximum Physical Value
100 lb
Minimum Electrical Value
0 V/V
Maximum Electrical Value
.0024709 V/V
Mapping Method
Linear
Bridge Type
Full
Impedance of Each Bridge Element
350 Ohm
Response Time
.000001 sec
Excitation Level (Nominal)
10 V
Excitation Level (Minimum)
1 V
Excitation Level (Maximum)
12 V
Calibration Date
1/1/2004
Calibration Initials
RAB
Calibration Period (Days)
365 days
Measurement Location ID
0
Users Data
Thank You From TTI
[Close Box]
[Close Box]
ACCESSORIES
CAL-TEDS
Plug & Play Option
AD9
(9 PIN "D" Series) Connector attached to the
end of a Load Cell or Torque sensor cable with a TEDS
( Transducer Electoric Data Sheet ) EPPROM. Used with
a DPM-3 Load Cell Meter, the Load Cell and DPM-3 will
self calibrate. This option is a real time saver.
Learn about Plug & Play Smart Sensors.
[Close Box]
Learn
about Plug and Play Smart Sensors
What are Plug and Play Smart Sensors?
A Plug and Play Smart Sensor is a Sensor that is compliant to the IEEE
1451.4 Standard. TEDS, or Transducer Electronic Data Sheet, is a set of electronic data
in a standardized format defined within the IEEE 1451.4 standard. This data specifies what
type of sensor is present, describes its interface, and gives technical information such
as sensitivity, bridge type, excitation, etc. This information is stored in an EEPROM chip attached
to a sensor. By having this chip, the sensor can identify and describe itself to the
network and or Smart Load Cell Meter, thereby easing automatic system configuration. Let's
say you have a Transducer Techniques Load Cell or Torque Sensor with the
the proper instrument IEEE 1451.4 enabled Load Cell or Torque Sensor could be swapped in, self-identify,
and
work appropriately.
What are the advantages of Plug and Play Smart
Sensors?
Benefits that can be experienced now include:
Simplified troubleshooting
Reduced safety risks. It is no longer necessary to
"climb on machines" for connection verification
Reduced costs for set-up and tear-down
No recalibration is needed when replacing sensors
The data acquisition system can recalibrate itself
Advantages that will be available in the future include:
Integration with wireless transceivers
Elimination of large lengths of analog wiring
Reduced installation, maintenance and upgrade
costs of measurement and control systems
The opportunity to add intelligence to sensors
Can a legacy / non-TEDS sensor
be converted to a TEDS "Plug and Play" sensor?
Yes. A legacy / non-TEDS sensor can be converted to a TEDS "Plug
and Play" sensor. Transducer Techniques offers a CAL-TEDS service to convert your sensor to a TEDS "Plug and
Play" compliant sensor. The service consists of a connector, recalibration and a programmed
EEPROM. This will update a legacy / non-TEDS sensor to be capable of plugging into Transducer
Techniques IEEE 1451.4 compliant DPM-3 Smart Load Cell Meter.
What is Virtual TEDS?
Virtual TEDS is an online library of data sheets developed by National
Instruments (www.ni.com) that contain the same information that would be found in an EEPROM TEDS,
but exist for sensors not containing the EEPROM. This would define Plug and Play capability
for legacy / non-TEDS sensors. As a National Instruments Plug and Play Sensor Partner and a
National Instruments Alliance Member, Transducer Techniques has contributed the data for all
its sensors to the Virtual TEDS database.
What
parameters are included on a Transducer Techniques
TEDS chip?
TEDS Item
Values
Manufacturer ID
Transducer Techniques (ID#42)
Model Number
28
Version Letter
A
Version Number
3
Serial Number
149087
Transducer Electrical Signal Type
Bridge Sensor
Minimum Physical Value
0 lb
Maximum Physical Value
100 lb
Minimum Electrical Value
0 V/V
Maximum Electrical Value
.0024709 V/V
Mapping Method
Linear
Bridge Type
Full
Impedance of Each Bridge Element
350 Ohm
Response Time
.000001 sec
Excitation Level (Nominal)
10 V
Excitation Level (Minimum)
1 V
Excitation Level (Maximum)
12 V
Calibration Date
1/1/2004
Calibration Initials
RAB
Calibration Period (Days)
365 days
Measurement Location ID
0
Users Data
Thank You From TTI
[Close Box]
Home |
Products |
Tech Support |
About Us |
Contact Us
