CALL TO INQUIRE ABOUT EDUCATIONAL DISCOUNTS

Customer Account Information


		HOME \| PRODUCTS \| TECH SUPPORT \| ABOUT US \| CONTACT US \|


	View Cart		Checkout

Advanced Search

PRODUCT CATEGORIES
Load Cells / Force Sensors
Beam Load Cells
Torque Sensors
Load Cell Displays
Signal Conditioning
Data Acquisition
Software
Load Cell Accessories

TECH SUPPORT
Online Manuals
Wiring / Color Code
Calibration Certificates
Load Cell Troubleshooting
Warranty / Repair
Load Cell Terminology
Calculators
Free Load Cell Catalog
Track Your Order
Learn about Plug and Play Smart Sensors

We gladly accept:

View Cart

Checkout

DPM-3-TRES
TEDS Reader_Editor Software

Used along with a DPM-3 and a Serial Data Communication Board to Read and Edit Plug
and Play TEDS Smart Sensors.

Read and Edit Plug and Play Smart Sensors with TEDS

Computer connected to DPM-3 via RS-232

The DPM-3-TRES TEDS Reader_Editor software was developed to read and edit Plug and Play Smart Sensos that are compliant to the IEEE 1451.4 Standard. TEDS, or Transducer Electronic Data Sheet, is a set of electronic data in a standardized format defined within the IEEE 1451.4 standard. This data specifies what type of sensor is present, describes its interface, and gives technical information such as sensitivity, bridge type, excitation, etc. This information is stored in an EEPROM chip attached to the sensor. By having this chip, the sensor can identify and describe itself to the network and or Smart Load Cell Meter (DPM-3), thereby easing automatic system configuration.

Sample Screens
	Click on any of the reduced screens for a full-size screen view, then click on the Back button of your browser to return to this page.

		TEDS Reader / Editor Software Version 1.3
		Communications Click on the appropiate serial communication Bus type.
		Com Ports and Baud Rates Click to choose the appropiate Com Port and Baud Rate then click on the Establish button.
		Establish Communication If Communication has been established the Com Port and Baud Rate will be displayed in a window with a green background. If a TEDS EEPROM is detected it will be displayed in a lower window with a green background. At this point click the Continue button.
		Blank IEEE 1451.4 template You can populate the template by a file or by a DPM-3 meter. To populate by a DPM-3 meter, at the top of the screen in the Menu bar, click on Meter and then click Read.
		Populated IEEE 1451.4 template This IEEE 1451.4 template was populated via a DPM-3 meter by clicking on Meter and then Read in the Menu bar at the top of the screen.
		Editing a IEEE 1451.4 template This screen shows an example of changing units from pounds to newtons. Once the template data has been edited click on Meter and then Write in the Menu bar at the top of the screen. A pop-up warning screen will then appear click on yes.
		Newly Populated IEEE 1451.4 template This screen shows the newly edited IEEE 1451.4 template.

Order Code Model	Capacity Range	Description	Price	Quantity	Add to Cart
DPM-3-TRES	N/A	TEDS Reader_Editor Software	$150

DPM-3-TRES TEDS Reader_Editor Software

Read and Edit Plug and Play Smart Sensors with TEDS

DPM-3-TRES
TEDS Reader_Editor Software