CALL TO INQUIRE ABOUT EDUCATIONAL DISCOUNTS
Load Cell
Customer Account Information
HOME  |  PRODUCTS  |  TECH SUPPORT  |  ABOUT US  |  CONTACT US |                              
View Cart Checkout   
SEARCH
  
Advanced Search

TECH SUPPORT
Online Manuals
Wiring / Color Code
Calibration Certificates
Load Cell Troubleshooting
Warranty / Repair
Load Cell Terminology
Calculators
Free Load Cell Catalog
Track Your Order
Learn about Plug and Play Smart Sensors

We gladly accept:
 View Cart
 Checkout

PORTABLE / HAND-HELD / PEAK
CAPTURE / TRANSDUCER INDICATOR

PHM-100 PORTABLE LOAD CELL DISPLAY

 
 




The PHM-100 is a portable hand-held digital indicator for strain gage bridge type transducers such as load cells,
torque sensors and pressure sensors. It provides bridge excitation, balance, span adjustment, shunt calibration,
decimal point selection and digital display. When peak hold is in the on position, the highest static or dynamic
signal is captured at less than one millisecond and displayed until reset. The PHM-100 operates on a standard
9 volt battery for 60 hours and is equipped with a low battery Indicator.

      SPECIFICATIONS  
 
  SIGNAL CONDITIONER      PEAK CAPTURE       
  Type:   Full external bridge Type:   Analog  
  Sensor Resistance:   350 to 1000 ohm Response Time:   Less than 1 ms  
  Balance Range:   20% of FS Zero Reset:   .05% of full display Count  
  Shunt Calibration:   Push button, single point,
shunt resitance of 87.325 Kohm
Drop Rate:   .15% / minutes max
(approx 25 counts as FS)
 
      Capture Sense:   Bidirectional (via polarity switch)  
  BRIDGE AMPLIFIER      GENERAL      
  Type:    Bipolar differential Nonlinearity:   1 count FS  
  Input Sensitivity:    HIGH: 2mV for 19999 count min. LOW: 20mV for 19999 counts min (via Gain switch) Accuracy:   ± .1% of FS  
    Scale Factor    Tempco:   7ppm / °C max  
  Display Scaling:    0 to 19999 counts Noise:   2 counts max  
      Balance Stability:   .2% for 8 hours  
  BRIDGE EXCITATION     Gain Stability:   .02% for 8 hours  
  Type:   Constant voltage Operating Temp:   0° to 50°C  
  Output:   1.21 VDC Size:   5.7 x 3.1 x 1.5 inches  
  Output Current:   15 mA, short circuit protection Weight:   .6 lbs. approx  
      Connector:   9 pin D sub male  
      Power:   9 VDC battery for 60 hours low
battery annunciator
 
 

 
 
Order Code Model Capacity Range Description Price Quantity Add to Cart
PHM-100 N/A Transducer Indicator $550

 

© Copyright 2008 Transducer Techniques, Inc., All Rights Reserved.